Blink Camera Not Working (Here Are 5 Fixes to Common Issues!)

Having issues with the Blink security camera not working? It might be really upsetting if you can’t see the film when you’re away from home. In the event of an emergency, you will need to have access to your Blink security camera at all times.

If it’s not working, there might be a number of reasons. “Camera Busy” or other problem messages may also be popping up on top of that. When your Sync Module is malfunctioning, you’ll get these notifications.

It’s a common problem for Blink Camera customers. When anything goes wrong, don’t rush out and get a new one just soon! If you want to learn how to fix your Blink Camera, keep reading.

Blink Camera isn’t working

“Thumbnail Failed” and other similar problem messages mean that you’ll need to investigate your Blink Sync Module. In order to keep your camera linked to the Internet and other devices, you’ll need this.

The Blink’s batteries may be dead, or your home internet may be offline, if you get these errors. However, all of these remedies are quite straightforward. Your security system will be back up and running in no time if you follow this advice.

Fixing Blink Camera Problems

If you’re experiencing trouble utilizing your camera’s Live View function, there are a few situations where something may have gone wrong.

See also  How Do Smart Scales Work? (And Why You NEED One!)

Wireless connectivity is the most typical cause of problems.

The Sync Module or router may be too far away from your cameras. In addition, your router may need to be restarted, as well.

As a reminder, cameras need batteries to function. The cameras will shut off when their batteries run out.

Use lithium batteries instead than rechargeable or alkaline since they’ll last longer, according to Amazon.

To prevent the system from shutting down, keep an eye on the Blink’s battery life.

Here’s a step-by-step guide to troubleshooting your Blink camera:

The LED Indicator Light should be checked.

Start by determining the color of the LEDs on your gadget.

Connectivity difficulties are indicated by a red light. Blink app users should verify the signal strength of their devices. In order for Blink to function properly, it needs at least three bars of reception.

While the camera is capturing film, if you see a steady blue light, you may be certain that it is.

It’s possible that you won’t be able to see the video stream while the camera is recording. This is a common incident with various Blink camera types.

Restarting the Synchronization Module

The Sync Module will reconnect to the Wi-Fi if the device is restarted. To restart your Blink, use this approach.

Just remove the Sync Module from your outlet and wait a few seconds before plugging it back in. During this period, you should remove the batteries and then reinsert them.

A blinking green or blue light indicates that your router is needed to fix the device.

See also  Z Wave vs Zigbee: An In-depth Comparison (in 2022!)

Camera and synchronization module reset

Resetting the camera is a good idea if you keep experiencing problems connecting to it. Often, that’s all it takes to get the Blink back up and running.

It’s worth it to restart your Blink device in order to get your security system back up and running.

The first step is to locate the camera’s reset button. In general, it’s located on the back of the smartphone near the battery pack, however certain devices have alternative locations. Then, for at least 10 seconds, push the reset button with a paperclip or pencil. The hole is tiny, therefore you’ll need a thin object to fill it.) Upon completion of the reset, the LED lights should begin to flicker red.

Reconnect the Sync Module to the app and to Wi-Fi to complete this process. You should be able to complete it in just a few minutes.

Reset the Wi-Fi Router

The router may be to fault if you’re regularly experiencing connectivity troubles.

Unplugging your router from the wall for several minutes can resume your internet connection.

Wait for it to reconnect once you switch it back on.

You’ll notice an improvement immediately away if your router was faulty! The Sync Module and your router may also need to be moved closer together. There is a greater likelihood of connection issues if these items are placed too far apart.

Try a Different Power Supply

Try a different source of electricity as well.

Remove the batteries from your camera and attach a micro USB cable and a USB power adapter to it.

See also  Do LG TVs Have Bluetooth (YES, Here’s How to Connect…)

Doing so will enable your camera to operate without the need of any batteries..

In certain cases, this choice may not be suitable for you. If the batteries are faulty or exhausted, you may still want to attempt this alternative.

Conclusion

There are many things you may do if your Blink camera isn’t working:

Keep an eye on the LED and Wi-Fi signal strength

Try turning the gadget on and off.

Resetting the Sync Module and the camera could help.

Remove and reinstall the Wi-Fi adapter.

Try utilizing a different source of electricity.

It’s best to contact Blink’s customer care if none of these remedies work. When you need assistance enacting your warranty, they may assist with the process. You’d have to buy a new camera system if you didn’t.

In the event that you were successful in fixing your Blink camera, please let us know. Or, if you’ve come up with another idea, please share it in the comments section. Someone with the same issue may find it useful.

Leave a Comment

Your email address will not be published.